Server restart in case of blackout

Cables cables everywhere

First, just try to press the ON buttons of:

  • NAS

  • nusrv1

  • nusrv9

  • procsrv3

(procsrv3 is the only up upstairs, currently connected to mic3).

If they do not turn on, please check the multiplug (ciabatta).

Restart multiplug (ciabatta)

  • Disconnect the multiplug from the UPS (the cable going down from within the ciabatta, it is not any of the ciabatta plugs).

  • Disconnect all not working plugs (from the same series):

  • Reconnect the ciabatta to the UPS;

  • Reconnect all the plugs one by one, check if power is back

PreviousAdd-onsNextFEDRA software

Last updated

Was this helpful?